1. Home
  2. Titan Field Report Blog
  3. Why Telehandlers, Scissor Lifts and Boom Lift...

Aerial Lifts

Why Telehandlers, Scissor Lifts and Boom Lifts Struggle in the Cold

Boom lift parked in snow on a grey winter day

A telehandler that will not start can leave an entire crew waiting. A boom lift that responds slowly can hold up the work just as easily.

For contractors and rental fleets, getting ready for winter means looking after both the engine and the hydraulics. TITAN heater pads help by warming the oil before the machine goes to work. If you already know your machine, our aerial lift and telehandler fitment guide lists the heaters that fit popular Genie, JLG, Skyjack and SkyTrak models.

Why cold weather makes equipment sluggish

On diesel telehandlers and engine-powered lifts, cold engine oil gets thicker and resists the engine more while it cranks. It also flows less easily at startup. At the same time, cold batteries have less starting power.

The hydraulic system has a similar problem. As hydraulic oil thickens, lifting, boom extension and other functions can respond more slowly until the fluid warms up.

Starting the engine doesn't always warm a separate hydraulic reservoir quickly. A machine can be running while its hydraulic system still needs time to reach operating temperature.

How TITAN heater pads help

TITAN silicone heater pads attach to the outside of a compatible metal oil pan or hydraulic reservoir. When connected to the correct power supply, they pass heat through the metal into the fluid inside.

The benefit depends on where the pad goes:

  • Engine oil pan heating helps oil flow more easily at startup and cuts the resistance from thick, cold oil.
  • Hydraulic reservoir heating preheats the fluid, which helps reduce the sluggish response of cold hydraulic oil when the machine first starts working.

On a diesel telehandler or boom lift, both systems may benefit from heating. Each needs a heater chosen for its own fluid volume and mounting location. The fitment guide does this for you. Each model lists its engine oil and hydraulic tank capacities, a matching oil pan pad, hydraulic tank pad and battery warmer.

Preheating happens while the machine is parked and plugged in. How long it takes depends on the temperature, the amount of fluid and the heater you choose.

What about electric scissor lifts?

Electric scissor lifts have no engine oil pan to heat, but many still use hydraulics to raise and lower the platform. If the machine has a suitable metal reservoir, a correctly sized heater pad can help preheat that hydraulic fluid.

Battery performance and charging need separate attention. A hydraulic tank heater warms the fluid; it does not warm the battery. Our fitment guide covers engine-powered rough-terrain scissors. For electric slab scissors, size the pad from the reservoir capacity using our sizing guide, or send us the machine details.

Choosing the right heater for your equipment

Boom lifts and a telehandler raised against a blue sky

Match the heater to the fluid capacity, the mounting area available and the power supply. Choosing by machine model or engine size alone can miss important differences between installations. Our aerial lift and telehandler fitment guide sizes every pad by fluid capacity, using figures from each manufacturer's service manuals. Check those figures against your own machine before you order, since engine options and tank sizes can vary within a model range.

The pad needs a smooth, clean metal surface with full contact across its heating area. TITAN engine and fluid heater pads are not suitable for plastic tanks. Check the equipment manufacturer's requirements and follow the TITAN installation instructions.

Use preheating alongside the manufacturer's specified winter fluids, warm-up procedures and operating temperature limits.

Prepare your fleet before the first cold morning

Boom lift parked in snow on a grey winter day

Whether you run one telehandler or a rental fleet of boom and scissor lifts, the right heating setup starts with the application.

Find your machine in our fitment guide to see the matching heaters for each model. You can also browse TITAN engine and fluid heater pads, use our sizing guide, or contact our team with your equipment details for help choosing a heater.